Enterasys Networks D-Series - Manual (Page 361)

clear port ratelimit
Enterasys D-Series CLI Reference 12-13
clear port ratelimit
Use this command to clear rate limiting parameters for one or more ports.
Syntax
clear port ratelimit port-string [index]
Parameters
Defaults
If not specified, all index entries will be reset.
Mode
Switch command, read‐write.
Example
This example shows how to clear all rate limiting parameters on port fe.2.1.
D2(su)->clear port ratelimit fe.2.1
port‐string Specifies the port(s) on which to clear rate limiting. For a detailed
description of possible port‐string values, refer to “
Port String Syntax
Used in the CLI ” on page 4‐1.
index (Optional) Specifies the associated resource index to be reset.