Enterasys Networks D-Series - Manual (Page 278)

set vlan name
9-6 802.1Q VLAN Configuration
set vlan name
Use this command to set or change the ASCII name for a new or existing VLAN.
Syntax
set vlan name vlan-list vlan-name
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the name for VLAN 7 to green:
D2(su)->set vlan name 7 green
clear vlan
Use this command to remove a static VLAN from the list of VLANs recognized by the device.
Syntax
clear vlan vlan-list
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to remove a static VLAN 9 from the device’s VLAN list:
D2(su)->clear vlan 9
vlan‐list Specifies the VLAN ID of the VLAN(s) to be named.
vlan‐name Specifies the string used as the name of the VLAN (1 to 32 characters).
vlan‐list Specifies the VLAN ID of the VLAN(s) to be removed.