Enterasys Networks D-Series - Manual (Page 403)

set sntp poll-retry
Enterasys D-Series CLI Reference 14-31
Example
This example shows how to clear the SNTP poll interval:
D2(su)->clear sntp poll-interval
set sntp poll-retry
Use this command to set the number of poll retries to a unicast SNTP server.
Syntax
set sntp poll-retry retry
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the number of SNTP poll retries to 5:
D2(su)->set sntp poll-retry 5
clear sntp poll-retry
Use this command to clear the number of poll retries to a unicast SNTP server.
Syntax
clear sntp poll-retry
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the number of SNTP poll retries:
D2(su)->clear sntp poll-retry
retry Specifies the number of retries. Valid values are 0 to 10.