Enterasys Networks D-Series - Manual (Page 60)

clear banner motd
2-22 Basic Configuration
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the message of the day banner to read: “O Knights of Ni, you are
just and fair, and we will return with a shrubbery ‐ King Arthur”:
D2(rw)->set banner motd "O Knights of Ni, you are just and \n fair, and we will
return with a shrubbery \n \t -King Arthur"
clear banner motd
Use this command to clear the banner message of the day displayed at session login to a blank
string.
Syntax
clear banner motd
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the message of the day banner to a blank string:
D2(rw)->clear banner motd
show version
Use this command to display hardware and firmware information. Refer to “ Downloading a
Firmware Image ” on page 2‐28 for instructions on how to download a firmware image.
Syntax
show version
message Specifies a message of the day. This is a text string that needs to be in
double quotes if any spaces are used. Use a \n for a new line and \t for a
tab (eight spaces).