Enterasys Networks D-Series - Manual (Page 521)

clear maclock firstarrival
Enterasys D-Series CLI Reference 17-59
clear maclock firstarrival
Use this command to reset the number of first arrival MAC addresses allowed per port to the
default value of 600.
Syntax
clear maclock firstarrival port-string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset MAC first arrivals on fe.2.3:
D2(su)->clear maclock firstarrival fe .2.3
set maclock agefirstarrival
Use this command to enable or disable the aging of first arrival MAC addresses. When enabled,
first arrival MAC addresses that are aged out of the forwarding database will be removed from the
associated port MAC lock.
Syntax
set maclock agefirstarrival port-string {enable | disable}
Parameters
Defaults
None.
Mode
Switch mode, read‐write.
port‐string Specifies the port on which to reset the first arrival value. For a detailed
description of possible port‐string values, refer to “
Port String Syntax Used
in the CLI ” on page 6‐1.
port‐string Specifies the port(s) on which to enable or disable first arrival aging. For
a detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 6‐1.
enable | disable Enable or disable first arrival aging. By default, first arrival aging is
disabled.