Enterasys Networks D-Series - Manual (Page 58)

clear summertime
2-20 Basic Configuration
Defaults
If an offset is not specified, none will be applied.
Mode
Switch command, read‐write.
Example
This example shows how set daylight savings time to recur starting on the first Sunday of April at
2 a.m. and ending the last Sunday of October at 2 a.m. with an offset time of one hour:
D2(su)->set summertime recurring first Sunday April 02:00 last Sunday October
02:00 60
clear summertime
Use this command to clear the daylight savings time configuration.
Syntax
clear summertime
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the daylight savings time configuration:
D2(su)->clear summertime
set prompt
Use this command to modify the command prompt.
Syntax
set prompt prompt_string
Parameters
prompt_string Specifies a text string for the command prompt.
Note: A prompt string containing a space in the text must be enclosed
in quotes as shown in the example below.