Enterasys Networks D-Series - Manual (Page 135)

set port alias
Enterasys D-Series CLI Reference 6-9
Parameters
Defaults
If name is not specified, the alias assigned to the port will be cleared.
Mode
Switch command, read‐write.
Examples
This example shows how to assign the alias “Admin” to ge .3.3:
D2(rw)->set port alias ge.3.3 Admin
This example shows how to clear the alias for ge .3.3:
D2(rw)->set port alias ge.3.3
port‐string Specifies the port to which an alias will be assigned. For a detailed
description of possible port‐string values, refer to “
Port String Syntax
Used in the CLI ” on page 6‐1.
name (Optional) Assigns an alias name to the port. If the alias name contains
spaces, the text string must be surrounded by double quotes. Maximum
length is 60 characters.