Enterasys Networks D-Series - Manual (Page 231)

clear spantree msti
Enterasys D-Series CLI Reference 8-13
clear spantree msti
Use this command to delete one or more Multiple Spanning Tree instances.
Syntax
clear spantree msti [sid sid]
Parameters
Defaults
If sid is not specified, all MST instances will be cleared.
Mode
Switch command, read‐write.
Example
This example shows how to delete all MST instances:
D2(su)->clear spantree msti
show spantree mstmap
Use this command to display the mapping of a filtering database ID (FID) to a Spanning Trees.
Since VLANs are mapped to FIDs, this shows to which SID a VLAN is mapped.
Syntax
show spantree mstmap [fid fid]
Parameters
Defaults
If fid is not specified, information for all assigned FIDs will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display SID to FID mapping information for FID 1. In this case, no
new mappings have been configured:
D2(su)->show spantree mstmap fid 1
FID: SID:
1 0
sid sid (Optional) Deletes a specific multiple Spanning Tree ID.
fid fid (Optional) Displays information for specific FIDs.