Enterasys Networks D-Series - Manual (Page 487)

clear macauthentication password
Enterasys D-Series CLI Reference 17-25
Example
This example shows how to set the MAC authentication password to “macauth”:
D2(su)->set macauthentication password macauth
clear macauthentication password
Use this command to clear the MAC authentication password.
Syntax
clear macauthentication password
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the MAC authentication password:
D2(su)->clear macauthentication password
set macauthentication port
Use this command to enable or disable one or more ports for MAC authentication.
Syntax
set macauthentication port {enable | disable} port-string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
enable | disable Enables or disables MAC authentication.
port‐string Specifies port(s) on which to enable or disable MAC authentication. For a
detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 6‐1.