Enterasys Networks D-Series - Manual (Page 440)

clear dhcp ping
16-8 DHCP Server Configuration
clear dhcp ping
Use this command to reset the number of ping packets sent by the DHCP server back to the
default value of 2.
Syntax
clear dhcp ping packets
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example resets the number of ping packets sent back to the default value.
D2(rw)->clear dhcp ping packets
show dhcp binding
Use this command to display binding information for one or all IP addresses.
Syntax
show dhcp binding [ip-address]
Parameters
Defaults
If no IP address is specified, binding information for all addresses is displayed.
Mode
Read‐only.
Example
This example displays binding information about all addresses.
D2(rw)->show dhcp binding
IP address Hardware Address Lease Expiration Type
----------- ----------------- ----------------- -----
192.0.0.6 00:33:44:56:22:39 00:11:02 Automatic
192.0.0.8 00:33:44:56:22:33 00:10:22 Automatic
192.0.0.10 00:33:44:56:22:34 00:09:11 Automatic
192.0.0.11 00:33:44:56:22:35 00:10:05 Automatic
192.0.0.12 00:33:44:56:22:36 00:10:30 Automatic
ip‐address (Optional) Specifies the IP address for which to display binding
information.