Enterasys Networks D-Series - Manual (Page 302)

show diffserv class
10-4 Differentiated Services Configuration
show diffserv class
Use this command to display information about Diffserv classes.
Syntax
show diffserv class {summary | detailed classname}
Parameters
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display a summary of Diffserv class information. In this case, there
are two classes configured, named “guest” and “admin”:
D2(rw)->show diffserv class summary
Class Name Class Type Ref Class Name
----------------- ------------ -------------------------------
guest All
admin All
set class create
Use this command to create a new Diffserv class.
Syntax
set diffserv class create {all classname}
Parameters
Defaults
None.
Mode
Switch command, read‐write.
summary Displays a summary of Diffserv class information.
detailed classname Displays detailed Diffserv information for a specific class.
all Specifies that all match conditions must be met before the associated policy
is executed.
classname Specifies a class name for this new Diffserv class.