Enterasys Networks D-Series - Manual (Page 517)

set maclock disable
Enterasys D-Series CLI Reference 17-55
set maclock disable
Use this command to disable MAC locking globally or on one or more ports.
Syntax
set maclock disable [port-string]
Parameters
Defaults
If port‐string is not specified, MAC locking will be disabled globally on the stack or standalone
device.
Mode
Switch command, read‐write.
Example
This example shows how to disable MAC locking on fe.2.3:
D2(su)->set maclock disable fe .2.3
set maclock
Use this command to create a static MAC address‐to‐port locking, and to enable or disable MAC
locking for the specified MAC address and port.
Syntax
set maclock mac-address port-string {create | enable | disable}
Parameters
Defaults
None.
port‐string (Optional) Disables MAC locking on specific port(s). For a detailed
description of possible port‐string values, refer to “
Port String Syntax Used
in the CLI ” on page 6‐1.
mac‐address Specifies the MAC address for which MAC locking will be created,
enabled or disabled.
port‐string Specifies the port on which to create, enable or disable MAC locking for
the specified MAC. For a detailed description of possible port‐string
values, refer to “
Port String Syntax Used in the CLI ” on page 6‐1.
create Establishes a MAC locking association between the specified MAC
address and port. Create automatically enables MAC locking between the
specified MAC address and port.
enable | disable Enables or disables MAC locking between the specified MAC address and
port.