Enterasys Networks D-Series - Manual (Page 332)

clear policy port
11-16 Policy Classification Configuration
clear policy port
Use this command to remove a policy profile from one or more ports.
Syntax
clear policy port port-string profile-index
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to remove policy profile 10 from port 21 in slot 1:
D2(rw)->clear policy port fe.1.21 10
port‐string Specifies the port(s) from which to remove the policy profile. For a
detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 6‐1.
profile‐index Specifies the ID of the policy profile (role) to which the port(s) will be
added. This value must match the profile‐index value assigned using the
set policy profile command (“
set policy profile ” on page 11‐3) in order
for a policy profile to be active on the specified port.