Enterasys Networks D-Series - Manual (Page 59)

show banner motd
Enterasys D-Series CLI Reference 2-21
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the command prompt to Switch 1:
D2(su)->set prompt “Switch 1”
Switch 1(su)->
show banner motd
Use this command to show the banner message of the day that will display at session login.
Syntax
show banner motd
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the banner message of the day:
D2(rw)->show banner motd
O Knights of Ni, you are just and
fair, and we will return with a shrubbery
-King Arthur
set banner motd
Use this command to set the banner message of the day displayed at session login.
Syntax
set banner motd message
Note: Banner message text must be enclosed in beginning and ending double quotation marks.
The message itself cannot contain any additional double quotation marks.