Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 76)

2.2 Engineering Manager
2-43
2
Several function windows can be open at once, and the window to be used can be activated
as needed.
2.2.3 Basic Menus
The basic menus are active when no function windows are open, i.e., they are active when
no function windows are displayed in the Engineering Manager Window.
Position Monitor
(P), Task Monitor
(T), Motion Alarm
(A), and the menu
are displayed
only when online.
Menu Command Function
File (F)
File Manager (F) Opens the File Manager.
Open (O)
Definition (D)
Module Configuration (M) Define the Modules.
System Configuration (S)
Scan Time Setting (T)
Application Info. (I)
Data Trace (D)
Fault Monitor (F)
Group Definition (G)
Motion Parameter (P) *1
Drawing (D)
Open New DWG (O) Calls sequence programming tools.
Properties (R)
Main Program (L)
SFC Flow Chart (S)
SFC Time Chart (T)
SFC Action Box (B)
Constant Table (# Reg) (H)
Constant Table (M Reg) (M)
I/O Convert Table (C)
Interlock Table (I)
Part Composition Table (A)
Tuning Panel (P)