Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 458)

7.6 Tools
7-91
7
1 If a register number other than for a D register is input for the register number setting, there is no need
to input a drawing number.
2 For a register number setting, the motion program number can be input for the Drawing Number Box.
3 A register list cannot be displayed for X, Y, A, or # registers.
4 In Offline Mode, a register list can be displayed for only the M register, and not for other registers.
However, if the register data is saved on the hard disk or a floppy disk using the file transfer function,
the register list can be displayed.
Changing the Display
The numeric display mode and register type can be changed for the list register display.
Changing the Numeric Display Mode
The display mode for the register's numeric values can be changed to decimal, hexadecimal,
binary, or ASCII.
• Decimal Display
Register values can be displayed in decimal by selecting View Mode (M) and then DEC
(C) in the Register List Window.
• Hexadecimal Display
Register values can be displayed in hexadecimal by selecting View Mode (M) and then
HEX (H) in the Register List Window.
• Binary Display
Register values can be displayed in binary by selecting View Mode (M) and then BIN
(B) in the Register List Window.
• ASCII Display
Register values can be displayed in ASCII by selecting View Mode (M) and then ASCII
(A) in the Register List Window.
If register values that cannot be displayed as ASCII characters are set for ASCII display, undefined
data will be displayed.
Select
Controller N... CPU Name Order Name Group Name Server
INFO
INFO