Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 50)

2.1 File Manager
2-17
2
1. Click New (N) in the User Management Window. Input the new user information in the
User Info-New Dialog Box that is displayed, and click the OK Button.
2. When the settings have been completed, click the OK Button. The new user that has
been set will be registered.
„ Standard Registered Users
1 The CP-717 has users that are registered beforehand for each Machine Controller. Standard user privi-
leges and default privileges are also registered for each of these users.
2 The following table shows the standard registered users.
Table 2.1 Standard Registered Users
„ Changing User Information
The registered user information can be changed from the User Management Window.
Setting Details
User Name Input a user name of up to 16 characters. Spaces, comma (,), and an
existing user name cannot be used. USER-A, USER-B, and USER-C
are already registered in the CP-717 system, and cannot, therefore,
be used.
Password Input a password of up to 16 characters. Passwords can be the same
as long as the user name is not.
User Privilege Input the existing program file's read privilege in the R column, and
the write privilege in the W column as numbers between 0 and 7.
The higher the number, the higher the privilege.
Default User
(Default Privileges) Input the new program file's read privilege in the R column, and the
write privilege in the W column as numbers between 0 and 7. The
higher the number, the higher the privilege.
User Name Password
User
Privileges
Default
Privileges
Remarks
USER-A USER-A R7W7 R0W1 For system administrator
USER-B USER-B R1W1 R0W1 For security administrator
USER-C USER-C R1W0 R0W1 For operators
INFO