Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 474)

7.6 Tools
7-107
7
Input the following items and click the OK Button to search and replace the register num-
bers.
Search/Replacement Results Display Format
1. Search Results Display Window
Display Item Details
Target Register Input the register number to search for.
Registers: S, I, O, M, D, C, #, X, Y, Z
Register types: Integer, double-length integer, real, bit
Replacement To replace the register, input the register number to use after replace-
ment.
S, M, D, C, #, X, Y, and Z registers cannot be replaced with I or O
registers or visa versa.
Input the register type of the leading register. If no replacement reg-
ister is specified, the target register will be search for but not
replaced.
Replacement/Search Input the number of registers to search for. Specify the number of
words for integer registers and the number of bits for bit registers.
With bit registers, between 1 and 30,000 bits can be searched for in
one operation.
Replacement/Search Input the starting and ending drawing numbers to search. To search
only one drawing, specify just the starting drawing number.
Replacement/Search
Condition Specify the order of displaying the search/replacement results as in
order of drawing numbers or in order of register numbers.
OK Button Click this button to start the search.
Cancel Button Closes the Register Number Search/Replace Window.
New Condition Button Clears the search/replacement data.
Search/replacement
results display area Display the results of the search/replacement operation. Refer to
Search/Replacement Results Display Format following this table.
Display Item Details
DWG No. Search drawing number
Register Target register
1, 2, 3, etc. Refer to Search/Replacement Results.
1
2
･･･
１ ２ ３ ･･･
･･･ ･･･
･･･ ･･･
DWG No. Register
Result Result
Result Result