Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 213)

Module Configuration Definitions
3.6.6 MC350-I/O Definitions
3-118
3
The serial transmission parameters (communications parameters) are set to predetermined values, so it
is necessary to set the parameters again only for special cases. The values shown in the Generic Serial
Definitions Window are the default settings.
„ Saving, Deleting, and Closing General-purpose Serial Definitions
Refer to the procedures in 3.3 Basic Individual Module Definition Operations for details.
1 When the Delete command is executed, the 2-circuit general-purpose serial definitions data
will be deleted.
2 Ports Connecting to the CP-717
The transmission protocol for a port connecting to the CP-717 should be set to MEMOBUS. The
MEMOBUS specification is the default setting. The maximum transmission speed for a connection to
the CP-717 is 19.2 Kbps.
3.6.6 MC350-I/O Definitions
This section explains the MC350-I/O (Local I/O) Definitions that are set for virtual slot 03.
„ Opening the Local I/O Definitions Window
Open the Local I/O Definitions Window by referring to 3.3 Basic Individual Module Defini-
tion Operations.
INFO
Local I/O