Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 454)

7.6 Tools
7-87
7
7.6 Tools
This section describes the tools that assist programming.
• Register lists
• Tuning panels
• Cross-references
• Disable coil lists
• Comment lists
• Register number replacement
7.6.1 Register Lists
This section describes the register list structure and operations.
„ Outline
The current values of the Machine Controller's internal registers, the S, I, O, M, D, and C
registers, can be displayed or changed in real time on a Register List Window.
A separate Register List Window is opened for each set of register display parameters that is
set. More than one Register List Window can be open at the same time. When the Register
List (O) command is executed, a child window is opened to show the contents of the regis-
ters.
„ Opening a Register List Window
A Register List Window can be opened as a separate window from either the File Manager
or the Engineering Manager.
PT#: CPU#
環境選
択
PT#: CPU#
環境選
択
Parent window
Register List Window
Menu Bar
Register Window
Register Window
Child windows