Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 67)

Manager Functions
2.1.10 Transferring Files
2-34
2
Note: Yes: Defaults, but the specification can be canceled.
(Yes): Must be selected if required for transfer.
No:
Cannot be transferred.
-: Not supported in the current version.
„ Continuous Transfers
Multiple Machine Controller programs or definition data files can be transferred.
Continuous Transfer Window
The Continuous Transfer Window that is used when multiple Machine Controller programs
or definition data files are transferred is shown below.
D Register Yes Yes (Yes) (Yes)
DWG (comments) No (Yes) No (Yes)
FUNC (comments) No (Yes) No (Yes)
User Menu - - - -
Setting Details
Transfer Mode Select the transfer mode.
Change: If a directory with the same name exists at the destina-
tion, it will be overwritten.
New: If a directory with the same name exists at the destina-
tion, that directory and its contents will be deleted, a
new directory created, and the file transferred.
The transfer mode will be Change if the transfer is for a Machine
Controller. The combo box menu for the transfer mode cannot be
changed.
Type of File to be
Transferred Select the type of files to be transferred.
All of the files on the selected Machine Controller will be selected.
Transfer File
All File Transfer Individual File Transfer
Load Dump File Transfer Load Dump File Transfer