Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 222)

3.6 MP930 Module Definitions
3-127
3
„ Opening the MP930 Motion Parameter Window
To open the MP930 Motion Parameter Window, double-click the Motion Parameter File
Icon under the Motion Programs Folder displayed in the File Manager.
To open the Motion Parameter Window from the Engineering Manager Window, select File
(F), Open (O), Definition (D), and then Motion Parameter (P).
The tab pages can be scrolled in the following order by selecting View (V) and then Next Page (N)
from the menu.
• Fixed Parameters, Set Up Parameters, SERVOPACK, Monitor
To scroll in the opposite direction, select View (V) and then Back Page (B) from the menu.
MP930 Motion Parameter Window Control Tabs
The MP930 Motion Parameter Window consists of four control tabs: Fixed Parameters,
Set Up Parameters, SERVOPACK, and Monitor.
Table 3.20 Motion Parameter Window Control Tabs
Tab Function
Fixed Parameters Sets the fixed motion parameters.
Set Up Parameters Sets the setup motion parameters.
SERVOPACK Sets the Servo parameters.
Monitor Monitors the motion parameters.
MP930
SGDB
SERVO-
PACK
SGDB
SERVO-
PACK
INFO