Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 240)

3.7 MP940 Module Definitions
3-145
3
to the initial Motion Parameters Window.
Refer to 6.3.1 Motion Fixed Parameter Details in the MP940 Machine Controller User’s
Manual: Design and Maintenance (SIEZ-C887-4.1) for details on parameter settings.
Set Up Parameters Tab Page
Click the Set Up Parameters Tab.
Refer to 6.3.2 Motion Setting Parameter Details in the MP940 Series Machine Controller
User's Manual: Design and Maintenance (SIEZ-C887-4.1) for details on parameter settings.
Setting Item Details
Axis Number Displays the axis number. The axis is fixed at Axis 1.
No. Displays the number of the fixed parameter.
Parameter Name Displays the parameter name.
Input Data (Set Data) Input (or select) the value for the parameter. Refer to the list of
motion fixed parameters for details.
Unit Displays the unit for setting the data.
Setting Item Details
Axis Number Displays the axis number. The axis is fixed at Axis 1.
No. Displays the number of the setting parameter.
Parameter Name Displays the parameter name.
REG-No. Displays the number of the register that corresponds to the parameter
name.
Input Data (Set Data) Input (or select) the value for the parameter. Refer to the list of
motion setup parameters for details.
Unit Displays the unit for setting the data.
Current Value In online mode, the parameter's current value will be displayed. In
offline mode, nothing will be displayed.