Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 185)

Module Configuration Definitions
3.5.17 SVA Motion Parameters Settings
3-90
3
Fig 3.20 SVA Definitions Window
The Motion Parameters Window is composed of three tab pages: The Fixed parameters,
Set Up Parameters, and Monitor Tabs.
„ SVA Motion Parameters Window Original Menus
Refer to SVB Motion Parameters Window Original Menus in 3.5.19 SVB Motion Parameters
Settings for details.
„ Setting SVA Motion Parameters
Motion Fixed Parameters Tab Page
The motion fixed parameters required for Servo adjustment are set in the Fixed Parameter
Tab Page.
Tab Name Function
Fixed Parameters Sets the Motion Fixed Parameters.
Set Up Parameters Sets the Motion Setting Parameters.
Monitor Monitors the Motion Parameters.
Setting Item Details
Axis Number Select the desired axis number (axis 1 to axis 4). Set the fixed param-
eters for each axis in the Fixed Parameter Tab.
Parameter Name Displays the parameter name.
Input Data (Set Data) Input (or select) the parameter value in this column.
Unit Displays the units of the corresponding set data.