Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 156)

3.5 MP920 Module Definitions
3-61
3
All of the data listed above will be displayed in online mode. None will be displayed in
offline mode.
Error Status Displays the details on the error when an error has occurred in trans-
mission status.
The following table lists the error status.
Status Value Meaning
0 No error
1 System error
2 Local station port number setting error
3 System error (TCP settings)
4 System error (TCP settings)
5 Connection error (TCP settings)
6 System error
7 Data send error (TCP settings)
8 Data send error (TCP settings)
9 Data reception error (TCP settings)
10 Data reception error (TCP settings)
11 System error
12 Data conversion error (MEMOBUS and
MELSEC settings)
Send Count Displays the number of data (number of packets) sent to the remote
station.
Receive Count Displays the number of data (number of packets) received from the
remote station.
Error Count Displays the number of times that an error has occurred.
Response Time
[ms] Displays the time taken for a response to be received after a com-
mand was sent with the MSG-SND function.
Connection Displays the Connect Type (connection type) set in the Transmission
Parameters Tab.
Protocol Type Displays the Protocol Type set in the Transmission Parameters Tab.
Code Displays the Code (data format) set in the Transmission Parameters
Tab.
DST. Station Displays the DST. Station name (remote station name) set in the
Transmission Parameters Tab.
Setting Item Details