Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 68)

2.1 File Manager
2-35
2
Continuous File Transfer Menus
Changing Transfer Drives
Change the transfer drive when the files to be transferred are in the Other Media category.
The procedure to change the transfer drive is given below.
1. Click View (V) and then Change Transfer Drive on the File Transfer Menu.
2. Select the drive number in the Select Drive Dialog Box and click the OK Button.
Starting a Transfer
The procedure to start continuous file transfers is given below.
1. Select File (F) and then Execute (S) on the File Transfer Menu.
2. A file transfer start message confirmation box will be displayed. Click the Yes (Y) But-
ton to continue.
3. When transfer has been completed, a transfer completed confirmation message box will
be displayed. Click the OK Button to finish.
„ Saving in and Comparing with Flash Memory
Flash Memory Save/Compare Window
The window used to transfer files between the Machine Controller memory and the Flash
Memory is shown below.
Menu Command Function
File (F)
Execute (S) Starts continuous file transfer.
Exit (E) Closes the File Transfer Window.
View (V)
Tool Bar (T) Displays the tool bar.
Status Bar (S) Displays the status bar.
Error List (I) Reopens the Error Window.
Change Transfer Drive
(D) Changes the transfer drive.
Help (H)
About Application (A) Displays version information for the CP-717.
Help Topics (H) Searches for topics.