Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 263)

System Configuration Definitions
4.2.1 Opening the System Configuration Window
4-6
4
4.2 System Configuration
This section explains how to perform operations in the System Configuration Window.
The System Configuration Window is used to check the operating mode and status of the
Machine Controller's CPU, and to make settings.
4.2.1 Opening the System Configuration Window
Open the System Configuration Window according to instructions in 4.1.2 Opening System
Configuration Definitions Windows.
„ Login Information
Login information is displayed below the title bar in the System Configuration Window.
Hyphens will be displayed in offline mode.
„ Tab Pages
The System Configuration Window has only one tab page, System Configuration.
Login Information Details
PT# The communications logical port is displayed.
UT# The unit number of the MP900-series Machine Controller is dis-
played. The unit number is always 1.
CPU# The number of the CPU which was logged onto is displayed. The
CPU number is always 1.
Tab Page Details
System Configuration Sets the Machine Controller status and calendar values.