Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 322)

5.3 Creating Motion Programs
5-27
5
„ Exporting
The export function is used in the following cases:
• To temporarily save a file that is being edited by the Motion Editor.
• To edit an existing program with a standard text editor.
If an error, such as a syntax error, will occur in the Motion Editor when programming has not yet been
completed, the program cannot be saved in that condition. Unless there are no errors, use the following
export procedure to save programs that are in the process of being edited.
The export procedure is as follows:
1. With the edited program open, select File (F) and then Export (E). A window will be
displayed to specify where the text file is to be saved.
2. Select or input the name of the file and the destination folder, and click the Save Button.
If a file by that name already exists, it will be overwritten when the new file is saved.
3. After the file has been saved, close the Motion Editor Window.
5.3.8 Closing the Motion Editor
To close the Motion Editor and return to the Engineering Manager, select File (F) and then
Close (C).