Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 254)

3.7 MP940 Module Definitions
3-159
3
Fig 3.29 260IF Definitions Window
„ Setting Methods
The 260IF Definitions Window consists of the following three tab pages.
Transmission Parameters Tab Page
This tab page is used to set the following items.
1. Communications Cycle Time Information Settings
Tab Page Details
Transmission
Parameters Sets the communications and network parameters for the 260IF
Module.
I/O Status Displays the communications status with the slaves when setting the
master at online. For details, refer to Chapter 6 Network Mainte-
nance in the MP920 Machine Controller User's Manual: 260IF
DeviceNet (SIEZ-C887-5.2).
Status Displays the 260IF Module status when online. For details, refer to
Chapter 6 Network Maintenance in the MP920 Machine Controller
User's Manual: 260IF DeviceNet (SIEZ-C887-5.2).
Setting Item Details
Communications Cycle
Time (Set Value) If using the 260IF as a DeviceNet master, enter the communications
cycle time set value.
Communications Cycle
Time (Current Value);
Display Only Displays the communications cycle current value during I/O trans-
mission.
Transmis-
sion Param-
eters
I/O Status Status