Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 64)

2.1 File Manager
2-31
2
Setting Details
Source If the transfer source is a hard disk, floppy disk, or magneto-optical
disk, the source directory name will be displayed.
If the transfer source is a Machine Controller, communications infor-
mation for the source Machine Controller and the Machine Control-
ler type will be displayed.
Destination If the transfer destination is a hard disk, floppy disk, or magneto-
optical disk, the destination directory name will be displayed.
If the transfer destination is a Machine Controller, communications
information for the destination Machine Controller and the Machine
Controller type will be displayed.
Transfer Mode Select the transfer mode.
Change:If a directory with the same name exists at the destination, it
will be overwritten.
New:If a directory with the same name exists at the destination, that
directory and its contents will be deleted, a new directory created,
and the file transferred.
The transfer mode will be Change if the transfer is for a Machine
Controller. The combo box menu for the transfer mode cannot be
changed.
DWG to Motion
Program Select the type of file to be transferred.
Click File (F) and then Clear (W) in the File Transfer Window to
clear transfer file type settings.