I/o map tab page – Yaskawa MP900 Series Machine Controller for Standard Operation User Manual

Page 138

3.5 MP920 Module Definitions

3-43

2. Deleting Assignment Data

The procedure to delete the assignment data for one station is given below.

a) Move the cursor to the row to be deleted.

b) Click Edit (E) and then Assignment Delete (D) on the 215IF Transmission Defini-

tions Menu.

The assignment data selected in step 1. will be deleted.

I/O Map Tab Page

Allocate the Machine Controller's process I/O (local I/O and remote I/O) in the I/O Map Tab

Page.

TYPE

Select a name for the I/O device connected to each station. The following table
shows the I/O devices that can be selected.

Selected Item

I/O Device Name

Selected Item

I/O Device Name

CP-3500H

CP-517

CP-316

MP920

CP-916A

CP-902

CP-9200SH

215IF/INV

CP-317

RIO-05

CP-316H

RIO-2000

CP-916G

RIO-120

ACGC4000

REG-No., SIZE

Set the leading register number (I register number) and amount of I/O data.
Input an O register number for the leading register number of the local station.
Be sure that the registers set for each station does not overlap with the register
numbers for another station.

SCAN

Select the transmission processing scan that services I/O.

• HIGH: High-speed scan
• LOW:

Low-speed scan

Station Name
(Comment)

Comments up to 32 characters can be input for each station.

Setting Item

Details