Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 439)

Ladder Logic Programming
7.4.12 Saving and Closing Table Programs
7-72
7
Deleting Columns
Use the following procedure to delete one or more consecutive columns.
1. Select part of the column to be deleted.
2. Select Edit (E) and then Delete Column (R) from the table program menus.
The column or columns specified in step 1. will be deleted.
Columns cannot be inserted between the No. and Register columns in interlock tables.
7.4.12 Saving and Closing Table Programs
„ Saving
If a drawing or function program window is open, all programs (such as main programs) will
be saved at the same time.
1. Select File (F) and then Save (S) from the table program menus.
2. A window to confirm saving will be displayed. Click the Yes Button.
3. Click the OK Button in the window to inform normal completion of saving.
1 Interlock tables can be saved even if contact and COIL settings have not been made. This improves the
operability of the CP-717 by allowing the user to temporarily interrupt programming. The contact and
COIL settings must be made, however, before the program is executed.
2 The table programs will be compiled when they are saved. An error window will be displayed if a
compile error is detected.
3 Refer to Error Window Configuration under 7.3.11 Saving Ladder Logic Programs for information on
error windows.
„ Closing
The process of creating table programs can be exited by closing the Table Program Window.
Select File (F) and then Close (C) to close the Table Program Window.
M2Roll
M4Roll
M1RollPreparation
M2RollPreparation
M2Roll
M4Roll
M1RollPreparation
M2RollPreparation
INFO