Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 323)

Motion Programming
5.3.8 Closing the Motion Editor
5-28
5
1 Motion parameter can be changed or saved while the Motion Editor Window is open. If the number of
decimal digits in the fixed parameters is changed, however, a warning message will be displayed. Con-
firm the safety of the system before proceeding.
Fig 5.6 Warning Message for Save
2 Fixed parameters can be saved only when the servo is OFF. A Controller error message will be dis-
played if an attempt is made to change or save fixed parameters when the servo is ON.
Engineering Bulider ×
The number of decimal places
will be changed. This could
change the amount of axis
movement. Caution is required.
Is it okay to save?
Yes (Y) No (N)