Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 224)

3.6 MP930 Module Definitions
3-129
3
„ Set Up Parameters Tab Page
This tab page is used to set the parameters required for servo adjustment.
Refer to MP930 Machine Controller User's Manual: Design and Maintenance (SIEZ-C887-1.1) for
details on motion setting parameter settings.
In online mode, set values that are input are immediately saved to Machine Controller registers when
the Enter Key is pressed. The current value displays will be refreshed using these values.
Setting Item Details
Group Name Select one of the group names that was set in the group definitions.
Logical Axis Name Select a logical axis name. Set motion setting parameters for each
axis.
Parameter Name Displays the parameter name.
Reg No. Displays the register number corresponding to the parameter name.
Input Data (Set Data) Input the setting for the parameter.
Unit Displays the unit used to set the parameter.
Current Value Displays the current setting of the parameter in online mode. Noth-
ing will be displayed in offline mode.
INFO