Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 244)

3.7 MP940 Module Definitions
3-149
3
Tab Pages
The Counter I/O Definitions Window is composed of two tab pages: Fixed Parameter Set
Tab and I/O Data Set Tab.
When the CNTR I/O Definitions Window is opened without any settings having been made previously,
a New File Message Box will be displayed. Click the OK Button to proceed to the next operation.
„ CNTR I/O Definitions Window Menus
The following table shows the functions of the menu commands in the CNTR I/O Defini-
tions Window.
Table 3.22 CNTR I/O Definitions Window Menu Commands
„ CNTR I/O Definitions
Fixed Parameter Set Tab Page
This tab page is used to set the sync scan. Select System, High, or Low from the pull-down
list.
Refer to the MP940 Machine Controller User's Manual: Design and Maintenance (SIEZ-
C887-4.1) for details on scans.
Table 3.23 Fixed Parameter Settings
Tab Page Function
Fixed Parameter Set Sets the CNTR fixed parameters.
I/O Data Set Sets the CNTR I/O data.
Menu Command Function
Set (S)
Default (R) Returns settings to default values by channel.
View (V)
Tool Bar (T) Displays the tool bar.
Status Bar (S) Displays the status bar.
DEC (D) Displays I/O data in decimal.
HEX (H) Displays I/O data in hexadecimal.
BIN (B) Displays I/O data in binary.
No. Setting Item Details Default
-
Top Register No
(Leading
Register
Number)
Displays the leading address of the I/O register
to be used. 0
1 A/B Pulse Signal
Type
Always set to 5-V Differential Input. -
INFO