Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 187)

Module Configuration Definitions
3.5.17 SVA Motion Parameters Settings
3-92
3
Refer to the MP920 Machine Controller User's Manual: Design and Maintenance (SIEZ-C887-2.1) or
MP920 Machine Controller User's Manual: Motion Module (SIEZ-C887-2.5) for details on motion
setting parameters.
Motion Monitor Tab Page
The Motion Monitor Tab Page displays the current values of the motion parameters. The
parameters are only displayed in the Monitor Tab Page; the settings cannot be changed here.
5 D000 to D03F D040 to D07F D080 to D0BF D0C0 to D0FF
6 D400 to D43F D440 to D47F D480 to D4BF D4C0 to D4FF
7 D800 to D83F D840 to D87F D880 to D8BF D8C0 to D8FF
8 DC00 to DC3F DC40 to DC7F DC80 to DCBF DCC0 to DCFF
9 E000 to E03F E040 to E07F E080 to E0BF E0C0 to E0FF
10 E400 to E43F E440 to E47F E480 to E4BF E4C0 to E4FF
11 E800 to E83F E840 to E87F E880 to E8BF E8C0 to E8FF
Servo Number
Axis Number
1 2 3 4
INFO