Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 190)

3.5 MP920 Module Definitions
3-95
3
Table 3.16 Tab Pages in the PO-01 Definitions Window
It is possible to switch between these tab pages by selecting View (V) and then Next Page
(N) or Back Page (B) from the PO-01 Definitions menu.
„ PO-01 Definitions Window Original Menus
Refer toSVB Motion Parameters Window Original Menus in 3.5.19 SVB Motion Parameters
Settings for details.
„ Setting PO-01 Motion Parameters
Motion Fixed Parameters Tab Page
The parameters required in the MP920 are set in the Fixed Parameters Tab Page.
Refer to MP920 Machine Controller User's Manual: Motion Module (SIEZ-C887-2.5) for details on
motion fixed parameter settings.
Setting Parameters Tab Page
Parameters required in the MP920 are set in the Set Parameter Tab Page.
Tab Name Function
Fixed parameters Sets the Motion Fixed Parameters.
Set Up parameters Sets the Motion Setting Parameters.
Monitor Monitors the Motion Parameters.
Setting Item Details
Axis Number Select the desired axis number (axis 1 to axis 4). Set the motion
fixed parameters for each axis.
No. Displays the parameter number of the motion fixed parameter.
Parameter Name Displays the parameter name.
Input Data (Set Data) Input (or select) the parameter value in this column.
Unit Displays the units of the corresponding parameter.
INFO