Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 155)

Module Configuration Definitions
3.5.9 218IF Transmission Definitions
3-60
3
The definitions data can be deleted even if 0 is input for My Port (the local station's port number).
„ Status Tab Page
The Status Tab Page displays the data that the 218IF is actually transmitting. The tab only
displays the data; the settings cannot be changed.
Setting Item Details
This Station IP
Address (Local
Station's IP
Address) Displays My Port (the local station's IP address) set in the Transmis-
sion Parameters Tab.
Gateway IP
Address Displays the Gateway IP Address set in the Transmission Parameters
Tab.
Subnet Mask Displays the Subnet Mask set in the Transmission Parameters Tab.
DIAG. Port No Displays the System Port Number (diagnostic/engineering port num-
ber) set in the Transmission Parameters Tab.
CNO Displays the connection number (1 to 20).
Trans Status Displays the status of the connection when in online mode. The fol-
lowing table lists the transmission status values.
Status Value Meaning
1 IDLE status
2 WAIT status (waiting for connection)
3 CONNECT status (data transfers possible)
--- Unused connection
INFO