Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 46)

2.1 File Manager
2-13
2
Application Tab Page Settings
„ Changing PLC Folder Information
The procedure to change PLC folder information is given below.
1. Select the PLC folder to be changed with the cursor.
2. Select File (F), and then Properties (R) from the menu bar.
Alternatively, right-click the PLC folder and make the selection from the pop-up menu.
3. The Controller Configuration Window will be displayed. Change the Machine Control-
ler information using the following three tabs in the Controller Configuration Window:
Information Tab, Network Tab, and Application Tab. Refer to creating new PLC infor-
mation for the Information Tab Page and Network Tab Page settings.
When logged on to the Machine Controller or CPU, the Machine Controller information cannot be
changed.
Information Tab Page
Set the new PLC information, and then click the OK Button.
Network Tab Page
Set the new network information, and then click the OK Button.
Route If the 215IF’s Relay Function is used, set the network number and
the station number. For details, refer to 5.6 Relay Function in the
MP920 Machine Controller Communications Module User’s Man-
ual (SIEZ-C887-2.6).
Setting Details
Customer Enter the client name up to 32 characters maximum.
User Enter the user name up to 32 characters maximum.
Equipment Enter the facilities name up to 32 characters maximum.
Usage Enter the application name up to 32 characters maximum.
Date Enter the date of creation. The current date will be displayed as the
default.
Revision history When creating a new Machine Controller, a revision history cannot
be entered.
Setting Details
INFO