Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 197)

Module Configuration Definitions
3.5.19 SVB Motion Parameters Settings
3-102
3
„ Setting Motion Fixed Parameters
Motion Fixed Parameters Tab Page
The parameters required in the MP920 are set in the Fixed Parameters Tab Page.
Refer to MP920 Machine Controller User's Manual: Design and Maintenance (SIEZ-C887-2.1) or
MP920 Machine Controller User's Manual: Motion Module (SIEZ-C887-2.5) for details on motion
fixed parameter settings.
Setting Item Details
Axis Number Select the desired axis number (axis 1 to axis 4). Set the fixed param-
eters for each axis.
SERVOPACK Displays the type of SERVOPACK.
No. Displays the parameter number of the motion fixed parameter.
Parameter Name Displays the parameter name.
Input Data (Set Data) Input (or select) the parameter value in this column. The settings for
each parameter are listed below.
Unit Displays the units of the corresponding parameter.
INFO