Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 139)

Module Configuration Definitions
3.5.7 215IF Transmission Definitions
3-44
3
1. Limitations on Changing I/O Map Allocations
The settings made in advance in the Link Assignment Tab are allocated as defaults for
the high-speed scan I/O and low-speed scan I/O. The following limitations apply when
changing I/O allocations.
• I/O allocation can be deleted.
• The scan speed designation can be changed. (For example, "LI" can be changed to
"HI.")
• The I/O designation cannot be changed. (For example, "LI" cannot be changed to
"LO.")
Status Tab Page
The Status Tab displays the data that the 215IF is actually handling in link transmissions.
The tab only displays the settings; the settings cannot be changed.
Setting Item Details
Register Number Each column in the table represents the first digit of the register
numbers displayed on the left side of the table. In the following dia-
gram, the cursor is positioned over bit IB30B03.
I/O Assignments Allocate bits to I/O registers for high-speed or low-speed scan.
• HI: Input set for a high-speed scan.
• HO: Output set for a high-speed scan.
• LI: Input set for a low-speed scan.
• LO: Output set for a low-speed scan.
To allocate I/O, move the cursor to the desired bit and click HI, HO,
LI, or LO at the bottom of the display. An I/O allocation can be
deleted by moving the cursor to the desired bit and clicking DEL at
the bottom of the display.
ST# Displays the station number set in the I/O Assignment Tab.
TYPE Displays the I/O device name set in the I/O Assignment Tab.