Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 16)

1.1 CP-717
1-3
1
1.1.1 Recommended Personal Computers
The Programming Device must be able to perform many functions, such as high-speed data
transfer with Machine Controllers, control operations, and monitoring operations.
The personal computer should conform to the specifications listed below to allow smooth
operation of the CP-717. Check the specifications before installing the CP-717.
∗ 1. NEC9800-series personal computers can be used. However, only RS-
232C communications are supported with the Machine Controller.
The 215 high-speed communications interface is not supported.
∗ 2. Other CPUs with equivalent specifications to Intel CPUs can be used.
∗ 3. Increase memory size if other applications are to be run simulta-
neously. If memory size is not increased, performance may be
adversely affected by the computer frequently searching for free
memory.
∗ 4. The hardware disk capacity includes normal working space after
installation.
Notebook PC
or
Desktop computer
Operating system
Windows 95
or
Windows NT 4.0
PC architecture DOS/V *1
CPU Punting 200 MHz or better *2
Memory 64 MB min. (128 MB recommended) *3
Resolution 800 x 600 pixels
Hard disk 200 MB *4
Communications port RS-232C (19.2 Kbps)