Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 290)

4.5 Data Trace Definitions
4-33
4
2. In the Select Trace Time Axis Display Dialog Box, set the time axis display and the
sampling interval and then click the OK Button.
The numeric data will be displayed.
If the Trace Timing Box under the Data Trace Definition Tab Page is set to "Program" and the time
axis is changed to either Time Display A or Time Display B, the sampling interval must be input in the
dialog box in step 2. of the above procedure.
„ Changing the Beginning Sample Number for Display
The procedure to change and display trace data beginning with any desired sample number
is given below.
1. Select Sampling (S) and then Jump to Appoint Data (O) from the Data Trace Menu.
2. Input the beginning sampling number in the Dialog Box, and then click the OK Button.
The trace data will be displayed beginning with the number that was input.
„ Changing the Amount of Data to be Read
The procedure to change the number of trace data items to be read is given below. When the
RE-DSP function is subsequently executed, the number of data items set here will be read
from the Machine Controller.
1. Select View (V), Sampling (S), and then Number of Read Data (R) from the Data Trace
Menu.
INFO