Yaskawa MP900 Series Machine Controller for Standard Operation - Manual (Page 464)

7.6 Tools
7-97
7
1 When tuning panels are saved, a check of whether or not the definition data is correctly input is per-
formed. An error window is displayed if an error is detected during this check.
2 Refer to Error Window Configuration under 7.3.11 Saving Ladder Logic Programs for information on
error windows.
„ Printing Tuning Panels
Tuning panels can be printed from the Tuning Panel Window without starting the Print Man-
ager. Only the tuning panel that is currently open, however, will be printed.
Refer to 7.3.12 Printing Ladder Logic Programs for information on page settings and print-
ing.
„ Exiting Tuning Panels
The process of creating tuning panels can be exited by closing the Tuning Panel Window.
Select File (F) and then Close (C) to close the Tuning Panel Window.
7.6.3 Cross References
The cross reference function will search programs to find out which registers are used in
which programs and how the registers are used.
„ Opening the Cross References Window
The Cross References Window is opened from the Engineering Manager.
Opening from the Engineering Manager
1. Select File (F), Open (O), Tools (T), and then Cross References (X) from the menu.
The Cross Reference Condition Window will be displayed.
2. Set the conditions in the Cross Reference Condition Window and then click the OK
Button. The Cross Reference Window will be opened.