Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 99)

Chapter 3 Edit Settings — [User Settings]
99
[On Screen Display]
Set display of the timecode and level meter on the status area.
1)
Click [Settings] on the menu bar, and click [User Settings].
2)
Click the [Preview] tree, and click [On Screen Display].
3)
Set each item.
[Show Normal Edit]/[Show Trim]/
[Show Export]
Check the timecodes or information to display at each operation.
[View] [Position]
Click the display position inside the monitor on the status bar to select the position.
[Size]
Select the font size of the status bar.
[Background]
Check this item to display the background on the status bar display area.
[Select Source Information] For captured clips, display information such as recording date. Select the information to display
from the list.
[Show Level Meter] Switch the show/hide setting for the level meter. Click [Default] to return to the default settings.
[Color and Threshold]
Set the color and threshold value of the level meter. Click a color sample to open the [Color
Select] dialog box.
[Invert Meter at Peak]
Select whether to invert the level meter when it peaks.
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
2
f The source timecodes of muted tracks are not displayed.
[Pre-Roll Editing]
Set preroll and postroll when editing preroll.
1)
Click [Settings] on the menu bar, and click [User Settings].
f The [User Settings] dialog box appears.
2)
Click the [Preview] tree, and click [Pre-Roll Editing].
3)
Set each item.
[Preroll Time] Set the preliminary operation time (preroll) when editing preroll.
[Postroll] Set the preliminary operation time (postroll) when editing preroll.
f “Previewing Cut Switch Points (Preroll Edit (Preview))” (w page 221)
f “Placing Clips while Checking Cut Switch Points (Preroll Edit (Rec))” (w page 222)
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
[Overlay]
Set the screen refresh rate, zebra preview (warning indication for brightness level) and display of the safe area.
1)
Click [Settings] on the menu bar, and click [User Settings].
2)
Click the [Preview] tree, and click [Overlay].