Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 147)

Chapter 4 Importing Sources — Capturing and Importing
147
(1) [Create new capture
list]
Create a new batch capture list.
(2) [Load capture list] Import the saved batch capture list (ECL, CSV, RNL, ALE or FCL file).
(3) [Save capture list] Save the content of the batch capture list as a CSV file.
(4) [Add to Batch Capture
List]
Add to the batch capture list.
(5) Source to be captured Check the sources to capture from the list.
(6) [Reel No.] Click this button to edit a reel name. If there is not even one batch capture list set with a reel
name, the [Reel No.] items are not displayed in the dialog box.
(7) [In]/[Out]/[Duration] Display the In and Out points and duration of the source.
The timecode that is given priority at capture is underlined. To change the timecode that is
given priority, select the source and right-click, and click [Change to In/Out capture] or [Change
to In/Duration capture].
The numerical value can also be changed by clicking the timecode at [In]/[Out]/[Duration].
(8) [Type] Click and select the content to capture (both video and audio parts/video part only/audio part
only).
(9) [File Name] Click this item to specify the file name and save destination of the source to capture. Click the
folder icon to specify the save destination of the source to capture. You can also select multiple
sources to specify the save destination.
(10) Number of sources and
duration
Display the number of checked sources/total number of sources in list and each duration.
During a capture, the duration available for capture, current disk space usage, and the number
of file divisions are displayed.
(11) Clip marker During capture, add a marker with a comment to the source clip. A list of clip marker timecodes
and comments is displayed. Multiple clip markers can be assigned. When the source has been
captured in MPEG TS format, the information of the preset clip marker will not be recorded to
the captured source file but to the project file. The information of the clip marker set at capture
will not be reflected even if that source file is opened in another project file after EDIUS is
restarted.
“Setting Clip Markers at Capture” (w page 261)
(12) [Input Settings] Click the list to select the device preset used for capture.
[Capture Settings]
Display the [System Settings] dialog box. You can check and change [Capture].
2
f To delete the source to capture from the batch capture list, select and right-click the source, and click [Delete].
f To select all sources in the batch capture list, select and right-click the source, and click [Select All].
Saving Batch Capture Lists
You can save batch-captured sources as a list.
1)
Click the [Add to Batch Capture List] list button on the Player.
2)
Click [Batch Capture].
f The [Batch Capture] dialog box appears.
“[Batch Capture] Dialog Box” (w page 146)
1 Alternative
f Click [Capture] on the menu bar, and click [Batch Capture].
f Displaying the [Batch Capture] dialog box: [F10]
3)
Click [Save capture list].
4)
Set a file name and save destination, and click [Save].
2
f When “Mode1” is selected for the save format, hours/minutes/seconds/frames will be entered in a column. When “Mode2” is selected,
hours/minutes/seconds/frames will be entered in each respective column.