Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 88)

Chapter 3 Edit Settings — [System Settings]
88
[XDCAM]
XDCAM Connection Settings
Set up FTP server connections before downloading and importing XDCAM sources from the server.
1)
Click [Settings] on the menu bar, and click [System Settings].
2)
Click the [Importer/Exporter] tree, and click [XDCAM] → [FTP Server].
3)
Set each item.
[Server List] This is the list of XDCAM servers that is displayed in the source browser folder view.
[Add] Click this item to display the [FTP setting] dialog box for adding connection servers.
“[FTP setting] Dialog Box” (w page 88)
[Remove] Delete servers from [Server List].
[Modify] Change the server settings.
[Move Up]/[Move Down] Sort the list.
Select a server from [Server List] and move the selected server one place up or down with
each click of [Move Up] or [Move Down].
[Settings] Display the settings of the connection selected in [Server List].
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
r [FTP setting] Dialog Box
[Name] Enter the name of the server to display in the folder view.
[Address] Enter the IP address or server name of the FTP server.
[Username]/[Password] Enter the user name and password required when making the connection.
[Directory] Select a directory type from the list.
[Connection Test] Click this item to test the connection to the FTP server using the currently entered user name
and password.
2
f If connection fails by the connection test, try restarting the XDCAM device and PC after completing the FTP server connection setup.
XDCAM Importer Settings
Set whether to use high-resolution audio to edit proxy.
1)
Click [Settings] on the menu bar, and click [System Settings].
2)
Click the [Importer/Exporter] tree, and click [XDCAM] → [Importer].
3)
Set each item.
[When proxy is edited, high-resolution
audio is used if available.(VFAM drive
only)]
For data on VFAM drive, use high-resolution audio data to edit proxy.
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
XDCAM Browser Settings
Set the clip type, clip name and other settings when clips are imported before importing XDCAM sources.