Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 293)

Chapter 6 Editing Timelines — Multicam Mode
293
Example:
When switching the selected camera of the clip at the timeline cursor position from [C1] to [C3]
2
f When the timeline cursor is moved over the clip to switch the selected camera, and the camera video of each track currently displayed on
the Recorder is double-clicked, the camera switch point can be set and the selected camera can be switched at the same time.
Multicam Editing by Shortcut Keys
You can set the camera switch point and selected the camera using the numeric keypad. When only the selected camera is displayed in the
single mode, perform multicam editing using shortcut keys. The following shows shortcut key operations and camera numbers assigned to
each key.
Camera No. Corresponding Numeric Keypad Operation
1 [1]
2 [2]
3 [3]
4 [4]
5 [5]
6 [6]
7 [7]
8 [8]
9 [9]
10 [Alt] + [0]
11 [Alt] + [1]
12 [Alt] + [2]
13 [Alt] + [3]
14 [Alt] + [4]
15 [Alt] + [5]
16 [Alt] + [6]
Switching the Selected Camera Simultaneously with Setting of the Camera Switch Point
1)
Move the timeline cursor to the point to switch the camera.
2)
Press the numeric keypad corresponding to the camera to switch to with [Ctrl] on the keyboard held
down.