Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 100)

Chapter 3 Edit Settings — [User Settings]
100
3)
Set each item.
[Update Frequency] Set the refresh rate for the video preview screen. When displaying interlaced images,
movement of subjects may be smoothed and accidents (such as reversed field orders) can then
be checked visually by refreshing the screen at the field rate (twice as fast as the frame rate).
(There is no difference between both settings when displaying progressive images.)
[Field]
For example, in the case of 29.97 fps frame rate, the screen is refreshed 59.94 times per
second.
[Frame]
For example, in the case of 29.97 fps frame rate, the screen is refreshed 29.97 times per
second.
[Zebra Preview] A striped pattern is displayed at relevant parts of the screen when the brightness level set at
this item is exceeded.
[Over]
Set the upper limit of the brightness level. Select [Color] of the stripe pattern that is displayed
when the upper limit of the brightness level is exceeded.
[Under]
Set the lower limit of the brightness level. Select [Color] of the stripe pattern that is displayed
when the lower limit of the brightness level is exceeded or brightness falls to 0 IRE or below.
[Show Safe Area] Display the safe area on the Player and Recorder.
Switch the show/hide setting for [Action Safe] and [Title Safe]. The action safe area can be set
as desired.
[Guide Lines for 16:9 Monitor]
Select the guideline to display when the frame aspect ratio of the video is 16:9. When [Darken
the Outside] is checked, the outside of the guideline is displayed darker.
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
[User Interface]
Set assignments for operation buttons, timecode display, bin display items, and keyboard shortcuts.
“Operation Button Settings” (w page 121)
“Control Area Settings” (w page 131)
“Changing Keyboard Shortcut Assignments” (w page 137)
“Bin Detailed Display Item Settings” (w page 134)
“Changing the Color of Operation Screens” (w page 136)
[Source]
Set operations when capturing sources.
[Duration]
Set the duration when still image clips or title clips, for example, are placed.
1)
Click [Settings] on the menu bar, and click [User Settings].
2)
Click the [Source] tree, and click [Duration].
3)
Set each item.
[Still Image] Set the default duration when placing still image clips.
[Add between In/Out]
Check this item to place color bars, color mattes and title clips for focus tracks (other than title
tracks) between In and Out points on the timeline. Note, however, that this setting is not applied
when those are placed by dragging and dropping.