Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 103)

Chapter 3 Edit Settings — [User Settings]
103
[Select Operation] Dialog Box
[Category] Select operation categories from the list to narrow down the items.
[Filter] Enter a keyword to narrow down the items.
Operation list Displays operations available for assignment. You can also assign operations by dragging
operations and dropping onto the buttons in the [Control] tab or the list in the [List] tab.
[Use Key Repeat] Check this item to repeatedly perform an operation when a key is held down.
[Find Short Cut] Click this item and press any key on the keyboard to select the shortcut operation assigned to
the key.
How to Use the Behringer BCF2000
(1)
(2)
(3)
(4)
(5)
(6)
(1) Encoder knobs Encoder knobs can be used as buttons. Select the operation that is performed when a button
is pressed by the encode selection buttons. No functions are assigned to the rotation direction
of the encoder knobs.
(2) Upper buttons These buttons function as the SELECT button for selecting the learning mode.
(3) Lower buttons These buttons are used for emulating touch operations. The touch sensor part for the fader is
emulated. Press a button to set a break state, and release the button to set a release state.
(4) Encode selection
buttons
Upper left: SELECT
Upper right: AUX
Lower left: SOLO
Lower right: MUTE
(5) Preset selection
buttons
Select a preset No. To use this function from EDIUS, presets must be installed.
(6) Function buttons These buttons can be customized with key assignments.